|
|
Stratford Cycle Centre20 Dover Street, Stratford Ontario, N5A 7L4 PROCEDURES FOR WINTER STORAGE
Storage in the manner pictured above is not advisable. Please follow the outline below. Step 1. Fill fuel tank. Add fuel conditioner/stabilizer. Change engine oil and filter. Run engine for a few minutes to circulate fresh oil. Step 2. Use drain plug on carburetor to drain all the gasoline from the float bowl and fuel line. Step 3. Remove spark plugs and place ½ teaspoon of oil in each cylinder. Turn engine over to coat cylinder walls, pistons and rings. Replace the spark plugs. Step 4. Remove battery and store in a cool area - off the floor. Recharge once a month with a trickle charge or connect to a "Battery Tender"(recommended). Clean corrosion from battery box, battery cables and battery. Coat battery terminals and battery cables with waterproof grease. Step 5. Lubricate the drive chain. If your machine has a drive shaft, check oil level. Step 6. Inflate tires to recommended pressure. Block up the bike so that the weight of the bike is off both tires. If this is not possible, periodically move wheels to prevent flat spots. Step 7. Check coolant level of radiator models. Step 8. Wash, wax and polish motorcycle. Cover machine with dust cover. REMOVAL FROM STORAGE Step 1. Inspect the tires. Step 2. Install battery. Step 3. Check front and rear suspension. Step 4. Check brake fluid for level and appearance. Step 5. Inspect and clean air cleaner. Step 6. Inspect all nuts, bolts and fasteners. Step 7. Wax machine. Step 8. Check lighting- headlight, signals, brakelight. Step 9. Prime carburetors. Step 10. Test ride machine. Step 11. If machine is not running well, decide on getting a complete tune-up. * The procedures outlined above have been prepared with the assumption that the machine is in good running condition before you put it away for the winter * You can contact us by phone: (519) 271-8911 Our fax number: (519) 271-2005 Email us for more details: Sales Service Department: Service | |||